Instruction manual

Instruction Manual CyberScan PC5500/ 5000
73
This meter has memory capacity of up to 250 data points (1000 data
points for PCD5500). The View Stored Data screen allows you to sort
and look at specific data points. The stored data can be sorted by
sample identification number, date or operator identification number.
To View Stored Data
1. Access the view stored data screen from the pH (mV, Ion,
Conductivity) setup screen. The number of data points in the
memory and the sorting options are now displayed on the screen.
2. Use the arrow keys to highlight the desired data sort option.
3. Touch enter to access the sort option screen.
To sort by Sample ID#
1. Access the Sample ID sort option from the View Stored Data
screen.
2. Use the keypad to enter the sample ID# entered in error and re-
enter the ID#.
3. Touch clear to delete a Sample ID# entered in error and re-enter
the ID#.
4. Touch enter. All data will be sorted by the meter and the first data
point displayed on the screen will be the most recent data point
saved under the selected Sample ID#.
5. Touch next or prev to scroll through additional data points saved
in the memory of the meter.
6. Touch print to send the data to a printer or computer, OR touch
delete to erase the data point from the meter’s memory, OR
touch exit to return to the pH (mV, Ion, Conductivity) Setup
screen.
If a sample ID# is entered and no data points are stored with that
sample ID#, you will see a message indicating the sample ID# was
not found. Touch OK to return to the sample ID# keypad and enter
new sample ID #.