Instruction manual

Instruction Manual CyberScan PC5500/ 5000

To sort by Date

1. Access the Date sort option from the View Stored Data screen.

2. Touch clear to delete the current date.

3. Use the numeric keypad to enter the date on which the data

points you want to view were saved. Be sure to use/ to separate

the month, the day and the year.

4. Touch enter. All data will be sorted by the meter and the first data

point displayed on the screen will be the most recent data point

saved under the selected Date.

5. Touch next or prev to scroll through additional data points saved

in the memory of the meter.

6. Touch print to send the data to a printer, OR touch delete to

erase the data point from the meter’s memory, OR touch exit to

return to the pH (mV, Ion, Conductivity) Setup screen.

7. If a date is entered and no data points are stored with that date,

you will see a message indicating the date was not found. Touch

OK to return to the operator ID keypad and enter a new date.

To sort by Operator

1. Access the Operator sort option from the View sort data screen

2. Use the keypad to enter the Operator ID of the data point(s) that

you want to view.

3. Touch clear to delete an Operator ID entered in error and re-

enter an ID#.