Instruction manual

Instruction Manual CyberScan PC5500/ 5000
86
8.2 Select Ion Method
To Set Sample ID#
When this option is active, each time you touch print on the Measure
screen the ion concentration value along with date/ time/ channel and
the sample ID# will be sent to data storage. You can manually enter
an alphanumeric identification number of up to 9 characters for any
sample or you can have the meter sequentially number your samples
beginning at the number of your choice. You may also choose to
deactivate the sample ID#.
The ion sample ID# is set the same way as previously described in
pH Setup. See page 44 for instructions.
To Select Ion Method
1. Use the arrow keys to highlight the method you want to use.
2. Touch enter to accept the method and return to the Setup
screen.
OR
Touch exit to return to the Ion setup screen, without making any
changes.
Direct Reading with Standards
Known Addition
Known Subtraction
Analate Addition
Analate Subtraction
Direct Read with Blank offset
enter
Current METHOD
Select
Ion Method
S
T
Blank