User Guide

Instruction Manual CON 510
10
5 MEASUREMENT
The CON 510 bench meter measures up to 5 different measurement ranges with auto-ranging capability which
automatically detects and promptly switches to the appropriate range. The meter also allows measurements to be taken
with automatic or manual temperature compensation. The factory default is ATC on.
ATC basically compensates for any temperature variances of measured sample solution temperature automatically from
the normalization temperature set. Default normalization temperature is 25.0 °C (77.0 °F). However if you need to adjust
the default value from 15.0 to 30.0 °C, you may access SETUP sub-menu P3.4 first before measurement.
5.1 Automatic Temperature Compensation
For automatic temperature compensation (ATC) simply plug the conductivity/TDS probe
into the meter. The [ATC] indicator will light on the LCD. Default is ATC “YES”.
NOTE: If the ATC indicator does not light up, manual temperature compensation may be
set in the SETUP sub-menu P3.3. See SETUP sub-menu P3.3 for directions on selecting
ATC or MTC
.
To select option either ATC “YES” or “nO”, use either MI/▲ or MR/▼ key. Press ENTER
to confirm. Otherwise press CAL/MEAS key to abort option selection.
SETUP
o
C
A
TC
.
SETUP
o
C
A
TC
SETUP
o
C
C
A
L
M
E
A
S
E
N
T
E
R
R
A
N
G
E
OR