User Guide

Instruction Manual CON 510
25
11 SPECIFICATIONS
SPECIFICATIONS CON510
Conductivity Range 0 to 20.00, 200.0, 2000 µS/cm; 0 to 20.00, 200.0 mS/cm
TDS Range
0 to 10.00, 100.0, 1000 ppm; 0 to 10.00, 100.0, 100 ppt
(max. 200 ppt depending on factor setting)
Resolution 0.05 % Full Scale
Accuracy ±1% Full Scale
Temperature Range
0.0 to 100.0 °C; 32.0 to 212 °F
Temperature Resolution / Accuracy
0.1 ° / ± 0.5°C or ± 0.9°F
Cell Constant 0.1, 1.0, 10.0 (selectable)
Temperature Compensation Automatic / Manual (from 0 to 100 °C)
Temperature Coefficient 0.0 to 10.0% / °C
Normalization Temperature 15.0 to 30.0 °C (adjustable)
Conductivity to TDS Conversion factor 0.40 to 1.00
Number of calibration points (Automatic) 4; Maximum 1 per range
Number of calibration points (Manual) 5; Maximum 1 per range
Auto-ranging Yes
Hold Function Yes
Memory 50 data sets
Averaging/Stability (READY)/Auto-hold Selectable
Input 6-pin round connector
Display Custom Dual LCD
Power Requirements 110/220VAC mains, 50/60 Hz
Dimension 230 x 180 x 63 mm (meter only); 395 x 260 x 90 mm (boxed)
Weight 750 gm (unit); 1250 gm (boxed)
Note:
In presence of strong electric field, the accuracy in the worst scenario could be 5%.