User Guide

Instruction Manual CON 510
1
1 INTRODUCTION
Thank you for selecting the CON510 bench meter. This meter is a microprocessor-based instrument that is designed to
offer advanced yet user-friendly features for discerning users - ideal for laboratory and plant applications. It measures
Conductivity, Total Dissolved Solids (TDS) and temperature (
o
C/
o
F). It incorporates large memory capacity of up to 50
data sets and user-customisable functions – all are accessible through the membrane tactile keypad. A pull-out
reference card (concealed at bottom of meter) provides a quick handy guide to the functions of the individual keys as well
as useful troubleshooting hints for your reference.
The meter is packaged with a 2-ring Stainless Steel Ultem-body Conductivity/TDS electrode (cell constant K = 1.0) with
built-in temperature sensor (Order Code: EC-CONSEN91W/ 35608-50) and an integral electrode holder. For the list of
accessories refer to the Section 12 on Accessories.
Please read this manual thoroughly before operating your meter
.
2 DISPLAY AND KEYPAD FUNCTIONS
2.1 Display
The LCD (Liquid Crystal Display) has an upper and lower display.
The upper display shows the measured conductivity or TDS reading.
The lower display shows the measured temperature.
The display also shows error messages, keypad functions and program functions.
Upper Display
SETUP MEAS
CAL
MEM
Lower Display
ERR
ATC
OO
C F
READY
HOLD
ON
OFF
-8.8.8.8
12
3
4
5
6
7
8
10
9
11
12
13
14
15
16
17
mS
ppt
ppm
µ S
K =
1. SETup mode indicator 7. parts per thousand indicator (ppt) 13. Calibration solution
indicator
2. MEASurement mode indicator 8. parts per million indicator (ppm) 14. Cell constant indicator
3. CALibration indicator 9. Automatic Temperature Compensation
indicator
15. ON / OFF indicator
4. MEMory mode indicator 10. Temperature scale indicator (
o
C
o
F) 16. HOLD indicator
5. millisiemens indicator (mS) 11. ERRor indicator 17. READY indicator
6. microsiemens indicator (µS) 12. Probe indicator