User Guide

Instruction Manual DO 100

7.2 Memory Recall

Based on LIFO memory management, the last data input

into memory will be recalled first. The data recalled will

depend on which measurement mode (mg/L or %

Saturation) the meter is presently in. For example, if the

meter is in % Saturation measurement mode, pressing

MR/ key will recall data recorded in that measurement

mode only.

NOTE: For the following illustration, please note data

recorded Section 7.1, Data Input.

1. Ensure the meter is in MEAS mode.

2. Switch to the appropriate measurement mode (mg/L

or % Saturation) by pressing MODE key.

3. Press MR/ key to recall the last data recorded.

4. Press MR/ key again for next recorded data.

5. Repeat MR/ if necessary. See Figure 14.

Figure 14: Memory Recall