User Guide

Instruction Manual DO 100
21
8.1 SET Function in % Saturation Measurement Mode
This part of the SETUP function allows display of values and the changing of parameters
unique to the % Saturation measurement mode. Figure 16 on the following page shows the
flow diagram of the SETUP menu.
To access SETUP menu:
1. Switch on the meter.
2. Ensure that the measurement mode is in % Saturation. If not, press MODE key to
change from mg/L or ppm measurement mode to % Saturation.
3. Press SET key to enter the first level in its setup menu.
4. To move from one menu to the next without changing any parameter, simply press
HOLD key as shown in Figure 16.