User Guide

Instruction Manual DO 100
29
8.1.7 P 4.1: rdY
You can activate or deactivate the stabilising feature in the
meter in this menu.
1. Once you come to the setup menu shown in Figure 21,
press ENTER.
2. Press MI/ or MR/ key to toggle between ON or OFF.
3. Press ENTER or MODE key to go into the next menu.
8.1.8 P 4.2: A.oFF
The meter has a Power Auto-off feature that switches off the unit
20 minutes after the last key press. In situation where longer
period of time is needed to take measurement, the power Auto-
off feature can be switched off in this menu.
1. Once the [A.oFF P4.2] menu is reached (see Figure 22),
press MI/ or MR/ key to turn Auto-off feature ON (or
OFF).
2. Press ENTER key to confirm selection.
3. The meter will accept and move on to the next menu.
NOTE: Press HOLD key to skip any part of the operation
and move on to the next menu, or press
CAL/MEAS key to exit setup menu to go back to
measurement mode.
Figure 21: READY
Figure 22: Auto-Off