User Guide

Instruction Manual DO 100
37
8.2.8 P 4.2: A.oFF
The meter has a Power Auto-off feature that switches off the unit
20 minutes after the last key press. In situation where longer
period of time is needed to take measurement, the power Auto-
off feature can be switched off in this menu.
1. Once the [A.oFF P 4.2] menu is reached (see Figure 31),
press MI/ or MR/ key to turn Auto-off feature ON (or
OFF).
2. Press ENTER key to confirm selection.
3. The meter will accept and move on to the next menu.
NOTE: Press HOLD key to skip any part of the operation
and move on to the next menu, or press
CAL/MEAS key to exit setup menu to go back to
measurement mode.
8.2.9 P 5.0: r.Set
This allows you to clear all parameters programmed above and
re-set it to factory default values.
1. Once the [r.Set, P 5.0] menu is reached (see Figure 32),
press MI/ or MR/ key to turn reset feature ON (or OFF).
2. Press ENTER key to confirm selection.
3. The meter will clear all values and go back to measurement
mode.
Figure 31: Auto-Off
Figure 32: Reset All Values