User Guide

Instruction Manual CyberScan pH 11 / 110

1. Align the flange of the second electrode holder with the slot of the first holder

(Figure 8).

2. Slide the flange of the second holder into the slot of the first holder until the

tops of the holders are aligned and secure.

3.2.5 Insert the electrode into the holder

1. Do not use excessive force

when inserting electrodes into

the holders.

2. Insert the pH electrode into the

opening of the first holder until

the top housing of the electrode

touches the top of the holder.

3. If you are using a separate

temperature probe, insert the

probe into the opening of the

second holder until the ridge on

the housing touches the top of

the holder.

NOTE: The holder is designed for

probes 12 mm in diameter. Electrodes larger than 12 mm may not fit in the holder.

Forcing the electrode into the opening may damage the holder or your electrode.

The electrode holders can be attached in different positions for greater flexibility in

measurement and storage purposes. Simply slide out the electrode holders and

reorient into appropriate orientation before putting into position.

Figure 8: To attach a second electrode holder

Figure 9: Different positions for one hand operation