User Guide

Instruction Manual CyberScan pH 11 / 110
27
4. Press HOLD/ENTER key. The “Prn” primary display will flash until all data is
printed.
5. To stop printing, press PRINT key and exit to measurement mode. See
Figure 26.
NOTE: All stored memory will remain in the meter after printing.
pH
MEAS
READY
0
10
21.0
sec
sec
4.75
ENTER
HOLD
ENTER
HOLD
MI
MR
Flash until all stored
data are downloaded.
Set timed interval to
download stored data
to printer or computer
ATC
°C
"Prn" display will keep flashing
until all stored data are printed. .
To stop, press PRINT key
Figure 26: Print all stored data
To Print Selected Stored Data:
1. From measurement mode, press MR/▼ key.
2. “MEM” indicator appears and the last memory input location is displayed.
3. Press MI/▲ or MR/▼ key to select a specific memory location, and press
HOLD/ENTER key.
4. When ready, press PRINT key.
5. The screen flashes “Prn/CUr” for about 0.5 seconds and switches back to the
stored data of the specific memory location.
6. Press HOLD/ENTER key. The meter is now ready to recall the next stored
data in the following memory location. See Figure 27.