User Guide

Instruction Manual CyberScan pH 11 / 110
31
9.1 Advanced SETUP Mode Overview
Press the SETUP key to enter Setup mode. Press the MI/▲ and MR/▼ keys to scroll
through the sub groups.
9.1.1 pH Setup mode
SETUP
P 1.0
COF
P1.0: Unit Configuration
P1.1 Ready indicator (On, Off or Auto Hold)
P1.2 Select buffer option
P1.3 Number of calibration points: 2, 3, 4 or 5 (or 6 for DIN
buffer option)
P1.4 Select °C or °F temperature units*** (pH 110 only)
SETUP
pH
CAL
P 2.0
P2.0: View Previous pH Calibration Data (View only)
P2.1 First calibration point
P2.2 Second calibration point
P2.3 Third calibration point
P2.4 Fourth calibration point
P2.5 Fifth calibration point
P2.6 Sixth calibration point (for DIN buffer option)
SETUP
ELE
P 3.0
P3.0: View Electrode Data (View only)
P3.1 pH electrode offset
P3.2 pH electrode slope
SETUP
P 4.0
A
0
P4.0: Select Auto Power On/Off
P4.0 Select auto power on or off
SETUP
P 5.0
P5.0: Reset to Factory Default
P5.1 Reset pH calibrated data
P5.2 User reset back to factory default values
MEM
SETUP
P 6.0
P6.0: Memory Clear
P6.0 Clear all stored readings