User Guide

Instruction Manual CyberScan pH 11 / 110
54
Figure 57: Communication Settings for computer's Com port. It must match with COM port settings on
CyberScan pH 110 meter. Please refer to Section 8.1 Using pH 110 Meter With Printer or Computer on
page 23 for the settings.
10.3.3 Communication Settings
• Connect Using - For selecting communication port. (Select ‘1’)
• Baud Rate – For selecting baud rate. (Select ‘9600’ bps (bits per
second)).
• Parity – For selecting parity. (Select ‘None’)
• Stop Bits – For selecting stop bits. (Select ‘1’).
Figure 58: Under SAVE AS menu, you can save your data as *.dat or *.txt formats