User Guide

Instruction Manual CyberScan pH 11 / 110
2
2 DISPLAY & KEYPAD FUNCTIONS
2.1 Display
The LCD has a primary and secondary display.
• The primary display shows the measured pH or mV values.
• The secondary display shows the measured temperature.
The display also shows error messages, keypad functions and program functions.
MEM
pH
%
pH
R.mV
SETUP MEAS
CAL MEM
Primary Display
Secondary Display
ERR
ATC
°C °F
READY
HOLD
ON
OFF
1.8.8.8
1.8.8.8
1
2
3
4
5
6
7
8
9
10
12
11
14
13
15
16
17
18
-
-
Figure 1: Active LCD screen
1. SETUP - Setup mode
indicator
7. pH - pH indicator
13.
- Low battery indicator
2. MEAS - Measurement mode
indicator
8. °C°F - Temperature
indicator
14.
- Electrode indicator
3. CAL - Calibration indicator
9. pH - pH buffer selection
indicator
15.
- Calibration buffer
indicator
4. MEM - Memory recall mode
indicator
10. ATC - Automatic
Temperature Compensation
indicator
16. ON – READY/Auto HOLD set
up enable indicator.
OFF – READY set up disable
indicator
5. R.mv - Relative millivolt (For
pH 110 only)& millivolt
indicator (For both model)
11. MEM - Memory location
indicator
17. HOLD – Hold indicator
6. % - Percentage indicator 12 ERR - Error indicator 18. READY – Ready indicator