User Guide

Instruction Manual CyberScan pH 11 / 110
3
2.2 Keypad
A large membrane keypad makes the instrument easy to use. Each button, when
pressed, has a corresponding graphic indicator on the LCD (Figure 2 on previous
page). Some buttons have several functions depending on its mode of operation.
KEY FUNCTION
OFF
ON
• ON/OFF - Powers on and shuts off the meter. The meter will start in a
measurement mode similar to the last measurement mode it is in before
being switched off.
• CAL - Activates the pH or Relative mV calibration mode and when used
with the MODE key, it activates the temperature calibration mode.
• MEAS - Allows return to measurement mode when canceling or terminating
any operation.
• HOLD - Activates/Deactivates freezing of the measured reading while in
measurement mode.
• ENTER - Confirms the calibration values in Calibration mode and the
selection in SETUP and Print Function mode.
Scroll through the memory location and the stored data during memory
recall.
MI
MR
• MI (Memory Input) - Captures the measured readings of the pH, Relative
mV or mV with its corresponding temperature values and stores them in
the memory.
• MR (Memory Recall) - Retrieves the stored data from memory.
• ▲▼ - Sets the calibration values during Relative mV or temperature
calibration.
Scrolls through each SETUP and its sub group menu.
Scroll through Print Function menu and its parameters.
SETUP
• SETUP - Activates the parameter setting menu to allow you to customise
meter configuration, view calibration points and electrode offset data,
select auto power off, reset meter, and clear memory.
MODE
• MODE - Selects the measurement parameter option between pH with
temperature, Relative mV with temperature (only pH 110), and mV with
temperature.
(pH 110)
• PRINT - Allows print of current measurement or stored data to either the
printer or the computer.
ENTER
HOLD
MEAS
CAL