Instruction manual

29
7.5 P4.0: Unit configuration
This subgroup program allows you to customize the meter to
your specific needs. You can program the meter to:
1. Select READY function ON or OFF (pH 310 allows you an
additional feature of switching the Auto endpoint function
on or off)
2. Select the number of pH calibration points
3. Select between three standard calibration buffer sets (for
pH 310 meter only)
4. Select between °C and °F units for temperature readings
(for pH 310 meter only)
Figure 28 on the right shows the setup sequence for this
program subgroup.
NOTE: Programs P4.3 and P4.4 is only available in pH 310
meter.
Figure 28 - P4.0: Unit
configuration program (P4.3
and P4.4 available on pH 310
meter only)