Specifications

45
I N S T R U M E N T S
Please contact Argus if you require further information. Tel: [phone]
Calibration Notes
NEW LOGGERS
* For those loggers ordered
with calibration certificates the
following conditions apply:
Non-Probed Loggers & RH Loggers
Calibration certificates issued are IANZ
accredited at the following points; -15°C, 0°C
and 40°C.RH Calibration certificates issued at
2 points.
Probed Loggers
Standard calibration points are the same as
for the non-probed loggers i.e. -15°C, 0°C and
40°C. Other points are also available but the
standard calibration charges apply (refer the
following).
LOGGERS RETURNED FOR CALIBRATION
Non-Probed Loggers & RH Loggers
Only Mark 3 loggers can be calibrated by
Temprecord.
Probed Loggers**
Can now be calibrated to NZS/ISO/IEC/17025
standards with an IANZ traceable Calibration
Certificate issued with each calibrated logger.
Temprecord’s Calibration Service includes
adjustment of the logger subject to conditions.
Note:
• *Standard set points for Calibration are -15°C,
0°C and 40°C
• Other points for Probed loggers only are
available from -24°C to 125°C
• Maximum 3 points currently available
• Calibration certificate available for download at
www.temprecord.com
Logger Recalibration (by Temprecord
International)
Order Codes
TR 955007C
Calibration 1 point
TR 955008C
Calibration 2 points
TR 955009C
Calibration 3 points
Readers & Software
TR-953188 USB
SR2 USB Reader Interface (including
software)
Temp-Check
Easy to use, no computers or gadgets required, just open the lid,
pull the tab and it’s started. Factory sealed
Various models from 7 day to 60 day units available
Temperature range -25°C to +32.5°C. Accuracy ± 1.0°C
Available in singles or box lots of 24. Bulk quotations also
available
A battery powered bi-metal chart recorder ideal for easy low cost temperature verification of goods in transit and or storage.
MARATHON
ILMA-7DAY
7 day duration
ILMA-16DAY
16 day duration
ILMA-30DAY
30 day duration
ILMA-60DAY
60 day duration