User's Manual

82
Figure 14 Scrambling panel of a NET type USB SmartKey
16.6 Contents panel
The Contents panel is used for reading and writing SmartKey's internal memory. The values can be displayed in
decimal forma, by selecting the Dec key, or in ASCII format, by selecting the ASCII key, or in hexadecimal format, by
selecting the Hex key. The values to be input should be written directly in the table in the middle. Each cell of the table
corresponds to one of SmartKey's memory cells. The values can be written in SmartKey after pressing the Write key.
The panel can also show the SmartKey's serial number and the number of failed accesses. Figure 15 shows a Contents
panel with values shown in text format. The cell number is determined by the sum of the number in the left column and
the number at the top. For example, value "E" is in cell 9 (8 + 1), and value "U" in cell 10 (8 + 2).