USER MANUAL S34-FD TranSport Electrically powered scooter Class A (EN 12184) EV Rider, LLC 6410 Arc Way - Suite A Ft.
CONTENTS 1. SAFETY INSTRUCTION…………………………………...……………................................…3 2. ELECTOMAGNETIC INTERFERENCE(EMI)…………….…………………………………7 3. TECHNICAL SPECIFICATION…….…….………………..……………….…………………..9 4. ADJUSTMENT…………………………………………………………………………..………10 5. OPERATION OF CONTROL PANEL…………………………………..……………………..12 6. BATTERY AND CHARGING INSTRUDCTION….…………..……………………….…..…16 7. MAINTENANCE & REPAIR…..……………….………...………………….………..……..…18 8. TROUBLESHOOTING & FAULT REPAIR……….………..…………………………………20 9. CIRCUIT DIAGRAM…….………..
SAFETY INSTRUCTION General Never operate the scooter while you are under the Do not ride your scooter in traffic influence of alcohol. Never use electronic radio transmitters such as Make sure that there are no obstacles behind you while walkie-talkies, or cellular phones. reversing your scooter. Caution: Pinch Points. Keep hands clear Do not make a sharp turn or a sudden stop while riding your scooter.
Do not attempt to climb curbs greater than limitation Do not leave your hands and legs off the scooter when shown on Technical Specification driving. Do not operate your scooter during inclement weather. Do not allow unsupervised children to play near this This reduces the possibility of an accident or possible equipment while the batteries are charging. damage to the scooter Warning – Don’t operate your scooter for the first time without completely reading and understanding this user manual. 1.
a family member or care professional especially trained in assisting a scooter user in various daily living activities. Consult with your physician if you are taking any medication that may affect your ability to operate your scooter safely. 6. Do not attempt to lift or move a power scooter by any of its removable parts including the armrests, seats or shrouds. Personal injury and damage to the power chair may result. 7. Never try to use your scooter beyond its limitations as described in this manual.
Modifications This model has been designed and engineered to provide maximum utility. However, under no circumstances should you modify, add, remove, or disable any part or function of your power scooter. Personal injury and damage to the power chair may result. 1. Do not modify your power scooter in any way not authorized by authorized dealers. Do not use accessories if they have not been tested or approved by manufacturer. 2. Get to know the feel of your power scooter and its capabilities.
ELECTROMAGNETIC INTERFERENCE (EMI) The rapid development of electronics, especially in the area of communications, has saturated our environment with electromagnetic (EM) radio waves that are emitted by television, radio and communication signals. These EM wave are invisible and their strength increases as one approach the source. All electrical conductors act as antennas to the EM signals and, to varying degrees, all power wheelchairs and scooters are susceptible to electromagnetic interference (EMI).
TURN OFF YOUR POWERED SCOOTER AS SOON AS POSSIBLE WHEN EXPERIENCING THE FOLLOWING: ¾ Unintentional scooter movements ¾ Unintended or uncontrollable direction. ¾ Unexpected brake release The FDA has written to the manufacturers of power scooters asking them to test new products to be sure they provide a reasonable degree of immunity against EMI.
TECHNICAL SPECIFICATIONS MODEL S34-FD TranSport WEIGHT CAPACITY 115kgs(250 lbs) SEAT: TYPE/SIZE 16" Fish-on DRIVE WHEEL 200mmx50mm(8"x2") FRONT CASTER (WHEEL) 180mmx40mm(7"x1.6") REAR CASTER (ANTI-TIPPER) Option MAX SPEED 4MPH (6.5KP/H) BATTERY SPECIFICATIONS Li-Battery: 24V 11.5Ah Li-Polymer (14.5 option) Lead-Acid: 12V 12AH X 2 BATTERY RANGE 20km CHARGER TYPE 2.
ADJUSTMENT It is very easy to assemble your S34-FD TranSport scooter. Please follow the procedure below. S34-FD power scooter has an aluminum alloy body and can be easily folded to fit in the car for transportation. It also has easy to use controls and adjustable tiller positioning. Ö Distinctive stylish lightweight scooter. Ö Easy to use controls. Ö Adjustable tiller positioning. Ö Easy to remove the battery pack.
How to Un-Fold the Scooter x Lean the folded scooter on the floor resting on the rear wheel x Pull the red lever on the side of the scooter and begin unfolding it from the tiller. x Make sure to open the tiller until the two front wheels touch the ground and you hear a click indicating that the scooter is locked in the open position. x Unfold the scooter backrest. Make sure the free-wheel lever is in the engaged position. x Sit on the scooter and adjust the tiller to the desired height.
. OPERATION OF CONTROL PANEL The power scooter is simple to operate. However, we recommend that you read carefully the following instructions to become familiarized with your new vehicle. A Word of Caution: Before you turn the power on, always be aware of the environment that surrounds you to select your desired speed. For indoor environments we recommend that you select the slowest speed setting.
3. Power ON/OFF Light: The light will turn on when you turn the key to the on position. The light will turn off when you turn the key to the off position. 4. Horn button: Press this button to sound the horn. Driving: A) Controller ON/OFF Switch Insert the key to power on the scooter (Remove the key to power off).
lower when using the battery, regardless the battery voltage. The remaining battery meter needle goes higher only when recharging battery in progress. 2. System will power off when the battery voltage is lower than 21.0V. 3. System will be automatically power-off when the vehicle is not in use over 30 minutes. You need to remove the key and insert the key to restart the scooter. Free-Wheeling: 1.
brake function by moving the engaging/disengaging lever back into the engaged position by an attendant. Thermal Protection: Your power scooter controller is equipped with a safety system called thermal rollback. A built-in circuit monitors the temperature of the controller and motor. In case of excessive heat of the controller and motor, the controller will cut-off the power to allow the electrical components to cool down.
BATTERY & CHARGING INTRUCTION Lead-Acid Battery We recommend that you use deep-cycle batteries that are sealed and maintenance free for your power scooter. Both sealed lead-acid (SLA) and gel cell are deep-cycle batteries and are similar in performance. Deep-cycle batteries are specifically designed to provide power, drain down, and then accept a relatively quick recharge.
Note: Ö Always charge your batteries in well ventilated areas. Ö The charger is intended for indoor use only. Protect from moisture. Ö For maximum performance, it is recommended that you replace both batteries at the same time if the batteries are weak. Ö If the vehicle will not be used for a long period of time, arrange to have the batteries recharged at least once every month to avoid deterioration of the batteries.
MAINTENANCE & REPAIR Your power scooter is designed for minimal maintenance. However, like any motorized vehicle it requires routine maintenance. To keep your S34-FD for years of trouble-free operation, we recommend you follow the following maintenance checks as scheduled. DAILY CHECKS 1. Visual check on the conditions of tires. 2. Inspect the battery condition meter on the controller to determine if batteries need to be charged. MONTHLY CHECKS 1. Visually inspect the controller harnesses.
Warning! Failure to maintain the brushes could void the power scooter warranty. To inspect or replace the motor brushes: ¾ Unscrew the motor brush caps. ¾ Remove the brushes. ¾ Inspect the brushes for wear. ¾ Replace the brushes if necessary. New Motor Brush Worn Motor Brush Less than 9 mm Motor Brush caps Inspect the state of the battery terminals every six months. Make sure that they are not corroded and the connections are tight.
TROUBLESHOOTING & FAULT REPAIR P&G S-Drive 45 Amp controller: Your scooter is fitted with S-Drive controller, which continuously monitors the operating conditions of your scooter. If it detects a problem it will indicate with error message by flashing light on the power ON/ OFF light. You must count the number of flashes and see the list below to check the error type according to the number of flashes. Flash Description 1 The battery needs charging or there is a bad connection to the battery.
CIRCUIT DIAGRAM 21
BOM LIST DRAWING 22
WARRANTY DECLARATION Quality/ Warranty Declaration Products are to be fit for purpose and of excellent quality and performance. Warranty as Following: ¾ Frame: Two-year limited warranty ¾ Controllers: One-and-a-half-year limited warranty ¾ Electronic Components and Charger: One-year limited warranty ¾ Warranty Exclusion. The following items are not covered by warranty.
