Data Sheet

Figure 2.6: Angle degrees
6. Insert one (1) M8 socket head cap screw (supplied) into each T-Bracket at the desired
angle.
Figure 2.7: Secure loudspeaker
7. Tighten the two (2) M8 socket head cap screws (supplied) sufficiently so the
loudspeaker does not rotate.
The loudspeaker is set to the desired angle.
For more information, see Safety point, page 6.
en 11
Electro-Voice Installation Note 2015.03 | 01 | F.01U.308.107