Data Sheet

Truss adapter
The truss adapter is used to suspend an EKX-12, EKX-15, EKX-12P, or EKX-15P full-range
loudspeaker on 1.5-inch to 2-inch truss tubing.
The truss adaptor kits contain the following:
Quantity: Description:
1 EKX Full-Range Loudspeaker Accessories Installation Note (F.01U.308.107)
1 HEX L-KEY, 6MM, Long Arm
3 M10 Split Lock Washers
3 M10 Button Head Screws
1 Truss Clamp (with bolt and washer attached)
1 Bracket
1 M10 Fender Washer
1 M10 Forged Steel Shoulder Eyebolt
Table 2.2: Truss adapter kit components
Vertical adjustment of the truss clamp
The vertical adjustment allows the loudspeaker to be suspended at a natural down angle to
achieve the desired coverage. If the down angle required is in between the vertical adjustment
locations, use the smaller vertical adjustment location and a pull-back eyebolt. For more
information, see Suspending the truss adapter, page 15.
Figure 2.8: Vertical adjustment
Vertical
Adjustment
EKX-12 EKX-15 EKX-12P EKX-15P
1 -1.5° 2.0° -1.5° 2.0°
2 -34.5° down -29.5° down -34.5° down -29.5° down
Table 2.3: Approximate natural down angle reference
2.2
EKX Full-Range Loudspeaker Accessories
2015.03 | 01 | F.01U.308.107 Installation Note Electro-Voice