Data Sheet

Vertical adjustment of the truss clamp
The vertical adjustment allows the loudspeaker to be suspended at a natural down angle to
achieve the desired coverage. If the down angle required is in between the vertical adjustment
locations, use the smaller vertical adjustment location and a pull-back eyebolt. For more
information, see Suspending the truss adapter, page 15.
3
ETX-TCA-S
ETX-TCA-L
2
1
3
2
1
Figure 2.8: Vertical adjustment
Vertical
Adjustment
ETX-10P
(ETX-TCA-S)
ETX-12P
(ETX-TCA-L)
ETX-15P
(ETX-TCA-L)
ETX-35P
(ETX-TCA-L)
1 0° 0° 0° 0°
2 14° down 15° down 11° down 8° down
3 30° down 33° down 30° down 22° down
Table 2.3: Approximate natural down angle reference
Attaching the truss clamp to the bracket
The truss clamp illustration shows vertical adjustment 1. For more information, see Vertical
adjustment of the truss clamp, page 12.
To attach the truss clamp to the bracket, do the following:
1. Remove the bolt and washer (supplied) from the truss clamp.
Save the bolt and washer.
ETX Powered Loudspeaker Accessories
2014.09 | 03 | F.01U.299.895 Installation Guide Electro-Voice