Data Sheet

2. Align the truss clamp (A) with the desired vertical adjustment.
A
B
Figure 2.9: Truss clamp and bracket
3. Insert the bolt and washer (B) through the truss bracket into the truss clamp.
Use the bolt and washer removed from step 1.
4. Tighten the bolt (B).
The truss clamp is secured to the bracket.
Attaching the truss adapter
Use the correct size truss adapter designed for your ETX-10P, ETX-12P, ETX-15P, or ETX-35P
loudspeaker. The ETX-12P loudspeaker is shown in the illustrations with the truss adapter in
vertical adjustment 1. For more information, see ETX Powered Loudspeakers Accessory Guide,
page 6 and Vertical adjustment of the truss clamp, page 12.
To attach the truss adaptor to the ETX-10P, ETX-12P, ETX-15P, or ETX-35P loudspeaker, do
the following:
1. Using the L-Key (supplied), remove three (3) M10 screws from the top of the
loudspeaker.
Figure 2.10: Removing screws
2. Align the holes on the bracket fitting the loudspeaker size.
en 13
Electro-Voice Installation Guide 2014.09 | 03 | F.01U.299.895