Data Sheet

6. Insert four (4) of the M10 button head screws and four (4) M10 split lock washers
(supplied) into the top bracket.
Figure 2.19: Attach bracket
7. Tighten the four (4) M10 button head screws (supplied).
The top bracket is secured to the loudspeakers.
8. Remove the two (2) bottom suspension point M10 screws from the bottom of both
loudspeakers.
Figure 2.20: Remove bottom screws
9. Align the bottom bracket with the bottom suspension points.
The notches in the bottom bracket are designed to fit around the rubber feet.
en 19
Electro-Voice Installation Guide 2014.09 | 03 | F.01U.299.895