Data Sheet

10. Insert two (2) of the M10 button head screws and two (2) of the M10 split lock
washers (supplied).
Figure 2.21: Attach bottom bracket
11. Tighten the two (2) M10 button head screws (supplied).
The bottom bracket is secured to the loudspeakers.
Attaching the eyebolts
The array can be suspended using the four (4) supplied M10 eyebolts and four (4) washers. If
the desired down angle is between 0° and 45°, use the top front suspension points. If the
desired down angle is between 45° and 90°, use the rear top suspension points.
!
Caution!
Always orient the eyebolts in the plane of pull. Any hardware used to suspend a loudspeaker
not associated with Electro-Voice is the responsibilities of others.
Figure 2.22: 0° to 45° (left) and 45° to 90° (right)
For more information, see Safety, page 4.
ETX Powered Loudspeaker Accessories
2014.09 | 03 | F.01U.299.895 Installation Guide Electro-Voice