Data Sheet

To attach the eyebolts to the loudspeakers, do the following:
Illustrations show the 0° to 45° option.
1. Using the L-Key (supplied), remove the top front suspension point M10 screws from the
top of both loudspeakers (0° to 45°).
OR
Using the L-Key (supplied), remove the rear top suspension point M10 screws from the
top of both loudspeakers (45° to 90°).
Figure 2.23: Remove screws - eyebolts
2. Insert one (1) eyebolt and one (1) fender washer (supplied) into both loudspeakers.
Figure 2.24: Eyebolts
3. Tighten the eyebolts (supplied).
The eyebolts are tightened securely to the loudspeakers.
4. Remove the rear bottom suspension point M10 screws from the rear of both
loudspeakers.
en 21
Electro-Voice Installation Guide 2014.09 | 03 | F.01U.299.895