User manual

▪ QuickSmartDSP provides best-in-class processing via EV's signature single-knob user

interface with LCD. Easy setup via four presets (Music, Live, Speech, Club), three-band

EQ (low, mid, high), five user-programmable presets (Store and Recall settings), output

delay, phantom power, visual monitoring of limiter status, input level control and meters,

and master volume control to optimize gain structure.

▪ Ideal for portable applications. Light weight and intuitive assembly via the magnet

assisted sub pole make a quality performance easier than ever.

Quick setup

Subwoofer

To set up a subwoofer, do the following:

Step Illustration

1. Connect the AC power cord from a

grounded line receptacle to the MAINS IN.

FUS E T5AL/25 0V

REPLACE AS MARKED

OPE RATING V OLTAGE / TEGAN GAN:

100-240V AC / 50-60 Hz

MAINS IN

2. Connect the XLR or TRS cables from an

audio source to INPUT 1 or INPUT 2 or

connect the RCA cable or 3.5 mm mini jack

from an audio source to INPUT 3.

3. Adjust the input gain to (infinity).

4. Switch POWER to ON.

POWER

ON OFF

5. From the DSP home screen, increase the

input gain to the desired sound output.

6. Adjust the MASTER VOL knob to the

desired volume.