Specifications

Wi-Fi Plug
( 2 Outlets )
Specifications
Power: 120V AC, 60Hz
Total (Both Outlets): 10 Amps x 2
Wireless Frequency: 2.4GHz
Wireless Standard: IEEE802.11b/g/n
Total Max Load: 16A
Introduction
The GM-7 is an enabled 16A outdoor smart plug designed
for use for most residential lighting and motor applications. It's
compatible with LED, halogen, incandescent, xenon, fluorescent
and compact fluorescent bulbs. Works with Amazon Alexa, Google
Assistant, and many other apps.
With the GM-7, you can use
, or voice
control by Alexa and Google Assistant to operate your devices in
your home.
• WF37
•
Note: 7.
When the white LED is flashing
slowing (AP mode), please hold the
button 5 seconds until the LED
switches to rapidly blinking--Back
to EASY MODE.
Note:
Your device needs to be installed in the network coverage of your home router.
1. Please scan the QR code to download the application “Smart Life”.
2. If you cannot download Smart Life app, please search “Smart Life”
on Google Play (for Android phone) or Apple Store (for iOS phone) to
download.
3. The smart switch can be also used with Amazon Echo and Google
Home. Please scan the QR code below and follow the instructions if
you have any trouble pairing with them.
QR code Smart Life
,
please follow the instructions below to set up your smart switch.
Note:
Your device may need to be within 100 feet of the controller to be
included. If so, include the device to the network within 10 feet of
the controller and relocate it to the desired position in your home.
Be sure to refresh the network if the device is included in this
manner.
APP Connection
Amazon-Echo
Google-Home
Note:
1) Our products support Bluetooth quick-fit and 2.4GHz Wi-Fi network.
2) 3 connection network modes: Bluetooth quick-fit Mode, Easy Mode, AP
Mode. Choose the most suitable mode to configure the network.
3) Please operate quickly when the white LED indicator blinks rapidly.
4) When indicator flash enters the network, complete standard operation
within the 3 minutes.
5) If you failed to connect with Wi-Fi network, please try to operate several
times more.
▶ Bluetooth quick-fit Mode ◀
2
1: Plug-in the GM-8 directly into a wall outlet.
2. Turn on your .
in the “Smart Life” APP.
3
Once pluged in, it will enter into the
Bluetooth auto-connection mode.
6
When Bluetooth is off,
the APP will remind:
“You are advised to
enable Bluetooth”.
8
7
6
5
Tap ‘+’ to add a
device in your app
1 2
3
Hold the button 5 seconds
until “white” LED blinks
rapidly.
4
Enter the Wi-Fi
Password
Select “Electrician ”-
“Socket (Wi-Fi)”
Click “Continue ”
Select “is fast blinking(0.5s/time)”
Click and edit the name of switch!
▶ Easy Mode ◀
100%
8
WallPlug
4 5
OTHER WARNINGS
Risk of Fire
Risk of Electrical Shock
Risk of Burns
CAUTION - PLEASE READ!
This device (GM-8) is intended for installation in accordance with the National
Electric Code and local regulations in the United States, or the Canadian
Electrical Code and local regulations in Canada. If you are unsure or uncom-
fortable about performing this installation consult a qualified electrician.
MEDICAL EQUIPMENT
Please DO NOT use this plug to control Medical or Life Support equipment.
This device should never be used to control the On/Off status of Medical
and/or Life Support equipment.
FCC Caution.
*RF warning for Mobile device:
ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan
uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperated
with minimumdistance20cmbetweentheradiator&yourbody.
Unlock operation: click unlock on the
APP or press the device button 4 times
quickly.
or
X 4
Child lock
7
Wait for 100%
(LED stays in green 3 seconds.)
1
down the button for 5 seconds to initiate the
connection mode.
4:
5:
6:
7:
8:
You'll see "Devices to be added"
Click on "Go to Add"
Click "Add"
Enter the Wi-Fi Password of your
network
(Your phone should already be
connected to this same network
first)
Wait for the App to connect to
your Wi-Fi
Click on the new GM-7 you just
added, and you
can start you using it now.
Program button
Press 2x: On/Off the Right outlet
Hold 3s: On/Off simultaneously.
Smart outlet*2
Two outlets can remotely
turn On/Off the
connected devices.
100 feet
WallPlug
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.