Users Manual
Wi-Fi
Outdoor Dimmer Plug
( 2 Outlets )
Specifications
Plug x 1
Manual x 1
Screw x 1
Plastic Anchor x 1
+
Meet your new smart Plug !
(A) Manual / Program button
This is a “pass-through” outlet that is
always on
(C) Always On Outlet
This is your smart outlet that will be
included in your smart home
(B) Dimmer Outlet
Single press: manually turn on/off
your device.
Hold: adjust brightness.
Note:
Your device may need to be within 100 feet of the controller to be
included. If so, include the device to the network within 10 feet of
the controller and relocate it to the desired position in your home.
Be sure to refresh the network if the device is included in this
manner.
Power: 120V AC, 60Hz
Loading: 700W Dimmer Outlet -1
15 Amp Max Always-On Outlet -2
Wireless Frequency: 2.4GHz
Wireless Standard: IEEE802.11b/g/n
Operating Temp of -4° F~122° F
Please vertical hang on the wall.
A
B
C
100 feet
Introduction
The EVA LOGIK WF96D is a 700W MAX Loading smart dimmer plug
designed for use seasonal and landscape lighting, porch light, and
other indoor and outdoor plug-in small appliances. It's compatible
with dimmable LED, halogen, incandescent, and fluorescent bulbs..
Works with Amoazon Alexa, Google Assistant.
Overload protection and no hub required.
One smart outlet, you can use free App, or voice control by Alexa and
Google Assistant to operate your devices in your home.
One 15A Max loading bypass outlet for standard use.
• WF96D •
Plug x 1
Manual x 1
Screw x 1
Wall plug x 1
+
(A) Manual / Program button
This is a “pass-through” outlet that is
always on
(B) Always On Outlet
This is your smart outlet that will be
include to your smart HUB/Gateways
(C) Smart Outlet
Single press : manually turn on/off
your device.
Meet your new smart Plug !
Wi-Fi Outdoor Smart Plug
(2 outlets)
• ZW96 •
For outdoor use
IP65 Rated
For outdoor use
IP65 Rated
Note: Do not plug an extension cord in this smart plug.
The plug is designed to
be angled 45 degrees,
allowing you to make
the most of your home
wall outlet.
Use our screws
and anchor to
lock it in the
wall.(optional)
Overloading protection is protection against overheating
of the protected equipment. When the device's tempera-
ture is high, the LED will light up in red and cut down the
temperature of the device drops.
When the LED is purple (AP mode), please press the
button 3 times quickly until the LED change to
Sky-blue
and LED blinks--Back to EASY MODE.
Overloading
Warning
RGB LED indicator
Sky-blue: Network configuration mode
Blue: Light status indicator
Red: Network Failure/Overloading Warning
P
urple:
AP Network configuration mode
Note:
Your device needs to be installed in the network coverage of your home router.
1. Please scan the QR code to download the application “Smart Life”.
2. If you cannot download Smart Life app, please search “Smart Life”
on Google Play (for Android phone) or Apple Store (for iOS phone) to
download.
3. The smart switch can be also used with Amazon Echo and Google
Home. Please scan the QR code below and follow the instructions if
you have any trouble pairing with them.
QR code Smart Life
,
please follow the instructions below to set up your smart switch.
APP Connection
Amazon-Echo Google-Home