Manual

TRAVELMATE-DZ
Instruction Manual
15 | P a g e
7. Error Codes
Code Reason / Solution
ERR1 Thermistor is unplugged
- Contact Evakool
ERR2 Thermistor is short circuited
- Contact Evakool
E1 Low Voltage
- Please check the source voltage to ensure it is above
the cut out. Try lowering the voltage cut out setting to
LOW.
- The vehicle cabling may be inadequate/unsuitable,
please refer to cable specifications table for correct
cable thickness (Page 2)
- Try on a different power source
E2 Fan issue
- Fan is drawing too many Amps (Over 1 Amp) –
Contact Evakool
E3 Compressor Start Issues
- Unplug for 10 Minutes
- Try on a different power source.
- Possible Electronic Box or compressor fault – contact
Evakool
E4 The compressor speed is too low
- Unplug for 10 Minutes
- Reduce product load inside unit
- Move unit to a lower ambient temperature
- Clean vents / ensure clear air flow over compressor
E5 Ambient Temperature too high
- Clean vents / ensure clear air flow
- Fan Fault – Contact Evakool