Manual

TRAVELMATE-DZ
Instruction Manual
3 | P a g e
Using the Fridge
• Temperature setting range -18ºC 10ºC, 0ºF 50ºF
• Plug in the DC or AC power cable. Hold the ON/OFF switch for 4 seconds to run the fridge.
The LED display on the control panel will light up and the interior temperature will be
displayed.
• Press SET and then press the + and - buttons to adjust the temperature. Press the + button
to increase while the - button to decrease the temperature. To lock in the target temperature
press set twice or leave for 5 seconds. The display board will display the current temperature
inside the unit after the target temperature is set. After approximately 5 minutes the displayed
temperature will start to decrease.
• If the power supply is cut off, the refrigerator will switch off automatically and then
automatically switch on again when the unit receives power.
• To change the fridge between ºC and ºF. Press SET twice and then press - or + to change the
setting.
240 Volt Socket
12/24V Volt Socket
SET Button Display LCD + / - Buttons
USB Socket (0.5A) Emergency Switch
ON / OFF Switch