Manual

TRAVELMATE-DZ
Instruction Manual
4 | P a g e
• To change the battery voltage setting press the SET button until the V
L
is flashing and then
use the + or – buttons to change the setting. The three voltage settings are approximately as
follows :- (We advise to keep the setting on V
L
)
o V
L
– 11.0 Volts
o V
M
– 12.0 Volts
o V
H
– 12.5 Volts
• If dual zone unit; display panel will contain 2 Temperature Read-out’s. Press the Set button
once to set left bin temperature, twice to set right bin and thrice to set temperature mode.