User Manual

6
LED Control Panel
Temperature setting range: -18°C to 10°C.
• Plug in the DC or AC power.
• Press button for 4 seconds to turn the fridge on. The LED display on the control
panel will light up and the interior temperature will be displayed.
• Press the SET button once the le bin display will flash, use the and buttons to
set the desired temperature for this side.
• Press the SET button again the right side bin display will flash, use the and
buttons to set the desired temperature for this side.
• Press the SET button again the C (Celsius) will flash use the and buttons to
change between C (Celsius) or F (Fahrenheit).
• Press the SET button again the V will flash, use the or buttons to change between.
(We recommend VL setting ).
VL - Voltage Low 10.1 Volt cut out
VM - voltage Medium 11.4 Volt cut out
VH - Voltage High 11.8 Volt cut out
• Press the SET button again to lock in settings or just leave for 5 seconds to lock in
settings.
LED Display
On/O
Switch
+/- Buttons
SET Button