User Manual

Replacing the cartridge
1. Disconnect the device from a power source.
2. Remove the reservoir by sliding it up.
3. Use both hands to lift the upper part of the body. Push on both sides of its bottom part to release the
locks and then slide it upwards.
4. Take out the old cartridge by moving it aside.
5. Place Put the new cartridge in place of the old one, so that it could go in easily. Check the
orientation. Keep pushing until the cartridge is in the center of the device.
6. Put the upper lid of the body back so that it ts the slots.
7. Put the reservoir back in place.
8. The device is ready.
12.