RECYCLING At the end of its service life period the product should be recycled according to the recycling procedures in your region. www.evapolar.com 2O17 Evapolar Ltd. All rights reserved, including any and all copyrights and rights on Evapolar`s trademarks and service marks, if any. Subject to change without notice.
CONTENTS Introduction Safety regulations First start Daily use Placing the device Filling the reservoir Moving and transportation Temperature parameters Usage mode Tuning Mobile application Smart Home Device Maintenance Control panel and menu Start screen Control elements Menu points Cleaning and maintenance Reservoir Storage during long periods of no usage Replacing the cartridge Troubleshooting Warranty Tech specifications Legal Information 4 4 7 9 9 10 10 13 14 14 14 15 15 16 16 17 18 20 21 21 22 24 25 2
INTRODUCTION — — Congratulations! You have bought your own personal evaSMART air cooler from Evapolar. To take full advantage of the device, please install the Evapolar Mobile Application and read the product guide before you start using it. Intended use: The evaSMART air cooler is designed to cool and humidify the personal zone around you by creating a local microclimate within an area of 3 - 4 m2 (30 - 45 ft2). It also has a purification effect; filtering large dust particles from the air.
— — — — — — — — FIRST START Do not block the front and back grills of the device. Do not turn the device upside down; this will disrupt its functionality. Do not submerge the device in water or any other liquids; see cleaning guide below. Do not place open fire sources (candles, etc.) on top of the device.
DAILY USE 6 6. 7. 8. 7 SMART 8 Use the top panel of the device to adjust device parameters. Install the Evapolar Mobile App to extend the evaSMART management experience via Wi-Fi connection. Connect evaSMART to Smart Home and use the full voice experience for managing the device. The temperature of the outgoing air will start decreasing in a few minutes. You can vary the airflow using the mobile app or with the arrows on the upper part of the device.
The air cooler creates a personal comfort zone. To be in the centre of that zone, place the device within one metre (3 ft) of your position with its front grill facing you. To keep the device from causing any obstructions, place it slightly to one side of your position. In this way, you will always have room for your laptop, book or anything else needed for your activities. Filling the reservoir The device only needs water to work properly.
Temperature parameters 3 4 evaSMART Air Coolers work by using natural evaporative cooling so its power level can change in various climates. The charts below summarise the cooling power approximates in different aerial conditions in both Centigrade and Fahrenheit. MAX 60 min 3. 4. 5. 5 Put the reservoir back in place.
Usage modes Smart Home The device is created to be used at any location that meets the humidity and temperature prerequisites from the previous paragraph. Minimal power requirements allow the device to run even from a portable power bank. Required electricity parameters: voltage 5 V, current 2 A and up. Important: Due to outside conditions varying greatly, Evapolar is not responsible All of your evaSMART devices are accessible through Google Home, Amazon Alexa, Samsung Smart Things and Apple Home Kit.
CONTROL PANEL & MENU Start Screen Control elements Up button Previous button Temperature of incoming air Brightness Power button Fan speed button Temperature of outgoing air Colour mode/ Colour playlist Down button Next button During the first use evaSMART runs with preset default parameters. After being used and inputting your own personal settings, the device should run with those settings automatically.
Menu points Brightness In this mode you can change the water reservoir brightness to your liking. Press the sun button and use the arrows to change the values between 1% and 100%. To decrease or increase the brightness quickly, press and hold the arrow button. To adjust the night mode setting, use the mobile application. Fan speed In this mode you can change the fan speed to your liking. Press the fan button and use the arrows to change the values between 1% and 100%.
CLEANING AND MAINTENANCE Reservoir 1. 2. 3. 4. 5. The cleaning period depends on the level of dust in the area that you use your air cooler in. Prior to actual cleaning disconnect the device form the power source. Wipe the device grills with a soft cloth. Wash or wipe the reservoir. Put the device back together; it is now ready to use or store.
REPLACING THE CARTRIDGE 1. 2. 3. 4. 5. 2 6. 7. 8. 1 3 4 7 6 Important: — — — TAKE NEW CARTRIDGE — 5 Disconnect the device from a power source. Remove the reservoir by sliding it up. Pull out the safety panel to reach the cartridge. Take out the old cartridge by moving it forward. Place a new cartridge in place of the old one; this should fit easily as the new cartridge will have not yet expanded from previous uses.
TROUBLE SHOOTING Problem Possible cause Solution Problem Possible cause Solution The device does not turn on The device is not connected to power supply Plug in the device The device has been turned off via the control panel Touch and hold the power button Water from the reservoir does not reach the evaporative cartridge The reservoir has been placed into the device incorrectly Take the reservoir out and place it vertically next to the device Cold air does not come out of the device The airflow
TECHNICAL SPECIFICATIONS Power supply LEGAL INFORMATION 100 – 240 V / 50-60 Hz Other power sources 5V/2A Power consumption 10 W Cooling power Recommended cooling square/space Water tank capacity Water Refill Cycle Size Weight (without water) Working noise level Energy Efficiency Ratio (EER) Supplied accessories 100 - 400 W 4 m / 8 m (45 ft 2/ 285 ft3) 2 3 1300 ml every 6 - 8 hours 184 x 217 x 207 mm 1.
