Installer manual Owner manual

C-PRO CLIMA SISTEMA INSTALLER MANUAL
Page 20
3.4.4 MCPS solar panels controller network configuration
As the solar panels controller is the only possible controller of this type that can be installed in the
system, in order to configure it just enable the presence of the MCPS regulator from the thermal
power plant application, following the procedure given below:
1. Enter the Installatore  Parametri generali (Installer, General parameters) menu of the
MCCT regulator
2. Enable the presence of the MCPS regulator in the system
Enable the prsence of MCPS regulator in the system