Manual

Stop leavening specifications
CT1SA0040101
Vers. 1.11 15/36
P01 = -5°C
P01 = -5°C
-5
16.1. Parameters
Press ENTER to access the parameter setup mode.
The first line of the display shows the first parameter with its current value and its unit of measurement.
Use the INCREASE and DECREASE keys to scroll through all the control parameters.
Press ENTER to access the parameter change:
Use the INCREASE and DECREASE keys to change the parameter value. Press ENTER to confirm.
Press the MENU key to go back to the Home Menu.
16.2. Inputs/Outputs
Press ENTER to access the input/output display mode and use the INCREMENT and DECREMENT keys to scroll
through the quantities to be displayed:
Cell -6°C
Evapor -15°C
CDERVHU
1001100
Cell and Evaporator
temperature values
DI1 DI2 FAN
0195
DI1 Digital Input 1 status
DI2 Digital Input 2 status
FAN fans speed
Outputs status:
1 = relay enabled
0 = relay disabled
Humidity
14%
Humidity probe value
C compressor
D defrost
E solenoid valve or
light
R resistances
V fans
H steam generator
U humidifier