Instruction Manual

EVCO S.p.A. EVBOX1 | Installation guide ver. 1.2 | Code 144BOX1E124
page 40 of 88
P7 0 100 % 50 50 50 50 50 50 50 50
percentage of the temperature detected by the inlet air for the calculation of the CPT temperature (only ifP4 = 4) (3)
P8 0 250 s/10 5 5 5 5 5 5 5 5 delay displaying temperature variation P9 -999 P10
points/10
(4)
not
avail.
not
avail.
not
avail.
not
avail.
not
avail.
not
avail.
5 5 pressure transducer minimum setting
P10 P9 999
points/10
(4)
not
avail.
not
avail.
not
avail.
not
avail.
not
avail.
not
avail.
80 80 pressure transducer maximum setting
P11 0 1 - - - -
not
avail.
not
avail.
not
avail.
not
avail.
not
avail.
not
avail.
1 1
position of the pressure decimal point 0 = no decimal points
1
= on the tens digit
PARAM. MIN. MAX. M.U.
EVB1204N9
EVB1214N9
EVB1206N9
EVB1216N9
EVB1226N9
EVB1236N9
EVB1246N9
EVB1256N9
MAIN REGULATOR
r0 0,1 (5) 15.0 °C/°F (1) 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
if u1 and/or u11 7, working set-point differential; see also r12 (6) if u1 and/or u11 = 7, proportional band; see also r12 (7)
r1 -99.0 r2 °C/°F (1) -50.0 -50.0 -50.0 -50.0 -50.0 -50.0 -50.0 -50.0 minimum working set-point r2 r1 99.0 °C/°F (1) 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 maximum working set-point