Specifications

Even-GLO™ Series GA301 Page 20 Rev. 06/2009
Assembly
h. Connect gas supply and electric power following all local codes.
Check for gas leaks at all connections with appropriate soap solution.
Never connect an unregulated gas supply to the heater.
Do not use high pressure (above ½ psig) to test the gas supply system with
the appliance connected. Failure to comply can result in damage to the
appliance.
2. Ceiling Mount
a. Assemble 4 gusset plates to the base as illustrated. Use 5/16” carriage
bolts with washers and nuts.
alfresco-heating.com
888-Warm-Glo