Specifications

Even-GLO™ Series GA301 Page 22 Rev. 06/2009
Assembly
d. Install mounting brackets on both sides with supplies hardware.
e. Mount the heater base assembly to the ceiling in the desired location
keeping in mind clearance to combustibles. Use minimum 6 #14 x1.5” wood screws.
Caution: To prevent possible head injury provide pedestrian protection if lowest
point of the heater is less that 7 feet in height. The heater must have a minimum
clearance of 6 Feet below.
alfresco-heating.com
888-Warm-Glo