Product Description

ManualsBrandsEventFalcon ManualsElectronicsGPS Tracker

G500L

1.Introduction

1.1productdescription

G500Lisanall-in-oneintelligentterminalforwirelesscommunication,

GPSpositioningandOBDdiagnosis.Theterminalisplugandplay,and

youcaninstallityourselfwithoutaprofessional.Ownerscaneasily

applylocationtracking,vehiclesecurity,tripplayback,carbodycheck

andmore.Byreal-timeaccesstoautomotiveECUdata,operating

conditions,combinedwithoriginalalgorithms,youcanaccurately

calculatedrivinghabits(suchasfuelconsumption,rapidacceleration,

rapiddeceleration,sharpturns,etc.).

1.2Structureandinterface

PIN Define

4 GND

5 GND

6 CANH

7 K

8 Reserved

14 CANL

15 L

16 VCC

Summary of content (8 pages)

PAGE 1
G500L 1. Introduction 1.1 product description G500L is an all-in-one intelligent terminal for wireless communication, GPS positioning and OBD diagnosis. The terminal is plug and play, and you can install it yourself without a professional. Owners can easily apply location tracking, vehicle security, trip playback, car body check and more.
PAGE 2
1.3 Application scenarios • Private car owner • Fleet management • Financial loan • Inventory management 1.4 Features • can be directly installed in most vehicle • Easy to install, plug and play, no need for professional transformation • GPS, AGPS, LBS hybrid positioning, positioning quickly and accurately • Industrial-grade stable 4G communication solution • Ultra-low standby power consumption, intelligent monitoring of car battery power • Built-in battery, violent demolition alarm • 1.
PAGE 3
Storage Temp range -40~+85℃ Support OBDII Protocol 1 ISO9141-2 2 KWP2000_5BPS 3 KWP2000_FAST 4 CANBUS_11B_500K 5 CANBUS_29B_500K ISO9141 ISO14230 ISO15765 6 CANBUS_11B_250K 7 CANBUS_29B_250K 2. Function 2.1 Product Function Table Function Positioning & Tracking Sleep &wake-up Model LBS/GPS Positioning Description The terminal detects the car ignition ACC ON, starts continuous positioning, and uploads the position data every 15s.
PAGE 4
Read VIN Within 30 seconds after ACC ON, the device will actively read the vehicle identification number of the vehicle.
PAGE 5
GPS indicator Blue LED status Description Long bright GPS positioning success twinkle GPS search satellite Long off GPS sleep / ACC off 3. Installation Guide 3.
PAGE 6
3.2 Equipment installation Look for the location of the vehicle OBD interface. The OBD interface is a 16-pin female connector and the interface is trapezoidal. Note: The OBD interface positions of different models are different. The following figure shows the possible locations of the OBD interface. Some vehicle OBD ports are hidden behind the plastic baffle.
PAGE 7
Area A: above the clutch pedal Area B: Above the accelerator pedal Area C: Front of the center console downshift lever Area D: behind the front handlebar of the armrest box Area E: under the co-pilot glove box Note: Connect to the vehicle OBD interface, you can directly plug in or use the extension cable connection (installation of the dedicated extension cord and Velcro can be selected at the dealer according to actual needs) 7
PAGE 8
FCC warning statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.