User's Manual

Drift (MONO and POLY mode)
The DRIFT knob controls the amount of pitch drift in each voice. This is an
important "feature" of analog poly synths and gives a great effect when
used here.
Detune (UNISON only)
The DETUNE knob controls the amount of detune applied to each voice
in UNISON mode. Big. Thick. Sounds.
Stereo Width
The STEREO WIDTH knob controls the stereo image at the output of the
LOW PASS GATE. In MONO mode this uses the X and Y axis of the GEN-
ERATOR output to create very wide lead sounds. In POLY and UNISON
mode it pans the various voices in the stereo field to create stereo width.
Global Modulation Outputs
These modulation outputs allow common MIDI and MPE controller sig-
nals to be mapped to parameters.
1. VEL maps the the current MIDI note’s velocity to any Modulation
Input.
2. MOD maps the MIDI Mod Wheel Output to any Modulation Input.
3. KEY maps the relative pitch from the currently pressed KEY to any
Modulation Input. This can be used for adding key following to any
parameter.
4. PRS maps the midi Pressure output to any Modulation Input. When
MPE is active this is per note.
5. TMB is the MPE Timbre Modulation Output, also known as MIDI CC74.
It’s often mapped to the height along the key on several common
MPE controllers. This is only available when MPE is enabled.
15