User's Manual

value until another key is pressed. Glitch output is not affected by
this setting.
Sample and Hold Outputs
1. Noise outputs white noise. The Sample and Hold module controls
have no effect on this output.
2. Sample and Hold outputs the sample and hold signal.This signal
periodically samples the noise signal based on the rate and holds
it until the next period.
3. Sample and Glide outputs the sample and glide signal. This period-
ically samples the noise output, but instead of holding it glides to
the next value.
4. Glitch outputs either 0 or 1, randomly flipping between the two.
How often this flip happens is random, but it’s based on the rate as
set by the Frequency or Beats control.
3.4.5 Step Sequencer
The SEQ module provides an 8-step step sequencer allowing you to se-
quence any of the Modulation Destinations.
BEATS
The BEATS knob allows you to set the sequence step interval in beats.
This knob is only available when the TEMPO button is on.
FREQUENCY
The FREQUENCY knob allows you to set the sequence step interval in Hz.
This knob is only available when the TEMPO button is off.
20