User's Manual

Decay Time
The DECAY TIME knob sets the decay time of the reverb in seconds.
Mod
The MOD knob sets the amount of modulation applied to the Decay
Time, this will create a rich detuned sound.
Low Freq
The LOW FREQ knob sets the cutoff frequency of the Reverb’s highpass
filter.
High Freq
The HIGH FREQ knob sets the cutoff frequency of the Reverb’s lowpass
filter.
Color
The COLOR knob sets affects the resonance of the reverbs modes. Turn-
ing it down will result in a flatter tail, while turning it up will result in a more
resonant effect. Both sound nice.
3.5.5 Limiter
By default, the limiter is placed after EQ processing, but it can also be
placed before the EQ or at the very end of the effects chain.
Input Level Meter
This meter shows the input level to the Limiter section from -60dB to 0dB.
The peak hold meter is there simply to show if the peak was above 0dB,
but no clipping occurs at this point. It can be clicked to be cleared.
27