User Guide

H9 User Guide System Mode
42
[CLK.FLT] – MIDI Clock Filter Enable (ON, OFF)
Press the HOTKNOB button to select. Turn the Knob to set MIDI Clock Filtering ON or OFF. If
ON, H9 can be used with an unstable MIDI Clock source, but will be slower and less precise
at tracking clock speed changes.
Press the PRESETS button
once to back-up one level to MIDI menu.
Press the PRESETS button
twice to go to top level System menu.
[GLOBAL] – Global Settings
Press the HOTKNOB button to select. Turn the Knob to select either [MIX] or [TEMPO].
[MIX] – Enable Global MIX (ON, OFF)
Press the HOTKNOB button to select. Turn the Knob to set Global MIX. Mix is always stored
with Presets, but the stored value is not used if Global Mix is ON. With Global ON, the current
Mix is used for all Presets.
Press the PRESETS button
once to back-up one level to UTILITY menu.
Press the PRESETS button
twice to go to top level System menu.
[TEMPO] – Enable Global Tempo (ON, OFF)
Press the HOTKNOB button to select. Turn the Knob to set Global Tempo. Tempo is always
stored with Presets, but the stored value is not used if Global Tempo is ON. With Global ON,
the current Tempo is used for all Presets.
Press the PRESETS button
once to back-up one level to UTILITY menu.
Press the PRESETS button
twice to go to top level System menu.
[ISW] – Enable Global Input Swell (ON, OFF)
Press the HOTKNOB button to select. Turn the Knob to set Global Input Swell ON or OFF. If
Global Input Swell is ON, Input Swell will always be active, whether or not it was enabled in
the current preset.
Press the PRESETS button
once to back-up one level to UTILITY menu.
Press the PRESETS button
twice to go to top level System menu.
[OSW] – Enable Global Output Swell (ON, OFF)
Press the HOTKNOB button to select. Turn the Knob to set Global Output Swell ON or OFF. If
Global Output Swell is ON, Output Swell will always be active, whether or not it was enabled
in the current preset.
Press the PRESETS button
once to back-up one level to UTILITY menu.
Press the PRESETS button
twice to go to top level System menu.
[TUNER] – Tuner Settings
Press the HOTKNOB button to select. Turn the Knob to select either [AUDIO] or [CALBRT].