User Guide

H9 User Guide System Mode

Press the PRESETS button

once to back-up one level to UTILITY menu.

Press the PRESETS button

twice to go to top level System menu.

[PDLCAL] – Expression Pedal Calibrate (ON, OFF)

Press the HOTKNOB button to select. Select OFF to disable automatic Expression Pedal

calibration.

Press the PRESETS button

once to back-up one level to UTILITY menu.

Press the PRESETS button

twice to go to top level System menu.

[EXPTIP] – Select function of Auxiliary Switch Tip [SWITCH, PEDAL]

Press the HOTKNOB button to select. The rear panel 1/4 inch stereo phone jack labeled,

“EXP” can be connected to an expression pedal or up to three auxiliary switches. The function

of the “tip” must be selected to respond to an expression pedal or aux switch. The default

function is [PEDAL].

Press the PRESETS button

once to back-up one level to UTILITY menu.

Press the PRESETS button

twice to go to top level System menu.

[SER*] – Serial Number (H9-xxxxx)

Press the HOTKNOB button to display your H9’s unique serial number. The five digit number

will scroll by. You’ll need to know this number to request support and to download software

updates.

Press the PRESETS button

once to back-up one level to UTILITY menu.

Press the PRESETS button

twice to go to top level System menu.

[SW VER] - Software Version

Press the HOTKNOB button to display your H9’s software version.

Press the PRESETS button

once to back-up one level to UTILITY menu.

Press the PRESETS button

twice to go to top level System menu.