Manual

PitchFactor User Guide System Mode
51
[OUTPUT] – MIDI Transmit/Thru Select (XMT, THRU)
Press the Encoder to select. Turn Encoder to select either MIDI out to either transmit (XMT)
PitchFactor MIDI data or pass incoming MIDI data thru PitchFactor.
Note: if OUTPUT is set to THRU, none of the PitchFactor’s MIDI Transmit functions will be
operative.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[DUMP] – Dump Select (ALL, CURRENT, PRESETS, SYSTEM)
Press the Encoder to select. Turn Encoder to set what is being backed up via SysEx Dump or
Dump Request.
If ALL is selected, all saved Presets and System settings are dumped.
If CURRENT is selected, only the currently loaded effect is dumped.
If PRESETS is selected, all 100 Presets are dumped.
If SYSTEM is selected, all System Mode settings are dumped.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[CLK IN] – MIDI Input Clock Enable (ON, OFF)
Press the Encoder to select. Turn Encoder to set MIDI Clock Receive ON or OFF. If ON, MIDI
Clock is used as a Tempo source.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[CLK OUT] – MIDI Output Clock Enable (ON, OFF)
Press the Encoder to select. Turn Encoder to set MIDI Clock Transmit ON or OFF. If ON,
PitchFactor can be used as a MIDI Clock source.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[CLK FLT] – MIDI Clock Filter Enable (ON, OFF)
Press the Encoder to select. Turn Encoder to set MIDI Clock Filtering ON or OFF. If ON,
PitchFactor can be used with an unstable MIDI Clock source, but will be slower and less
precise at tracking clock speed changes.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.