User Guide

3.8.7 Gain
Each filter section also has its own accompanying Gain control. Use these to set the gain or attenuation
for each band’s center frequency. Each filter’s Gain may be set from -24 dB to +24 dB. The gain value
is numerically displayed to the right of the Gain control for each filter section.
3.9 Micro Pitch Shift
Figure 3.6: UltraChannel Micro Pitch Shift Section
The Micro Pitch Shift module is unique to the Ultra-Channel plug-in. It provides four controls that allow
you to easily control the four main dimensions of the micro pitch shift effect. The Micro Pitch Shift
module is routed after each of the modules on the top tier of the plug-in, but before the Output stage,
and in parallel with the Stereo Delays.
Click the In/Out button to display green to enable the module.
Descriptions follow for Micro Pitch Shift’s four parametric controls. Each control is adjustable from 0-100
percent, with 0 percent being a totally unaffected signal, and 100 percent being a totally affected. The
value for each control is displayed numerically beneath each control.
3.9.1 Size
The Size control scales the total amount of pitch shift applied to each voice.
3.9.2 Width
The Width control changes the panning spread from mono to stereo.
3.9.3 Depth
The Depth control scales the total spread of delay in the signal, higher depth spreading the signal further
in time.
3.9.4 Mix
Mix changes the blend of wet and dry signal.
3.10 Stereo Delays
The Stereo Delays module is comprised of a pair of delays that can be set either manually or by tempo,
and sports individual level, feedback and pan controls. Additionally, the Stereo Delays module contains
a powerful feature which allows the delay to feed its signal back into the any of the other modules in
12