Operator`s manual

Model VR240 Audio Logging Recorder
5-12
January 2000
NOTE
If you entered
Monitor
while you were recording, we make the
assumption that you want to listen continuously to the signals selected,
and the audible monitor remains active until you deliberately disable the
channels you are monitoring. If you entered
Monitor
from a
Ready
indication, the logger assumes that you are only listening to the enabled
channels to confirm their presence and level, and that you do not wish
to listen to them while recording. Therefore, the audio is disabled when
you start recording. If you do wish to continue monitoring the selected
channels, reselect the
Monitor
menu and the channels you previously
selected will again be connected to the audio output.
5-8. CHANNEL STATUS DURING RECORD.
The
Channel Status LED Array
located on the front panel shows the status (record, monitor,
play, or level) of the individual audio channels during recording and playback. Their functions
during
Record
are as follows:
OFF:
The channel either is not physically present in the unit, or has not
been enabled either for recording or for monitoring.
RED:
The channel is recording, i.e., it is active because its control input is
valid or an input signal is present
GREEN:
The channel is enabled to record, but no input signal is present or its
control signal is invalid.
ORANGE:
The channel is enabled for record (whether or not it is actually being
recorded) and it is also being monitored.
FLASHING
ORANGE:
The channel is being monitored, but it is disabled from recording.